Boiler Steam Properties
Units MKS SI FPS select Steam Type : Saturated SuperHeated select Steam Pressure : kg/cm2 Steam Temperature : degC	Sat steam conductivity : kcal/(hr.m.c) Dynamic Viscosity : Kg/(m.s) Density : kg/m3 Sat Steam Enthalpy : kcal/kg Sat Water Enthalpy : kcal/kg SaturationTemperature : degC	Sup Steam Conductivity : kcal/(hr.m.c) Dynamic Viscosity : Kg/(m.s) Density : kg/m3 Sup Steam Enthalpy : kcal/kg SaturationTemperature : degC
Input Data Units: MKS - kg/cm2, degC ; SI - bar, degC ; FPS - psi, degF
MKS Units: Temp-°C; Conductivity-Kcal/Hr/M/C; Dyn. Viscosity-Kg/M/S; Kin.Viscosity-m²/S; Sp.Heat-Kcal/Kg/C; Density-Kg/m³; Pressure - Kg/cm²;Calorific Value-kcal/kg
Steam Properties What is this  The calculations shows steam properties at different pressures and temperatures. Properties of Saturated steam as well as superheated steam can be obtained. Why do you need this These are basic steam properties which are usually available in steam tables. Steam properties are required for calculating steam side heat transfer, heat load of various applications like Boilers,  Thermic Fluid Heaters, Evaporators.. Etc. These properties are essential for sizing different equipment in process industry. Input/Output Data User can select any one of the Units and then enter the input data like pressure and temperature. Once the user clicks the RUN>> button, the software calculates the required parameters and display the output data. The output data consists of various steam properties like steam Conductivity, Steam Dynamic Viscosity, Steam Kinematic viscosity, Specific Heat, Enthalpy of saturated steam , Enthalpy of superheated steam. Areas where these calculations are useful and for whom This data is useful for design engineers, boiler practicing engineers, consultants and boiler operating engineers.